Vaporesso LUXE X3 Kit (5 ml, 2600 mAh)

The Vaporesso LUXE X3 Kit is a refillable pod system with a 5 ml e-liquid capacity. Airflow and power output are adjustable. Depending on the pod fitted, the system can be used for MTL, mouth to lung, RDL, restricted direct to lung, or DTL, direct to lung.

Technical details

• Battery: integrated and rechargeable, 2600 mAh.
• Output: adjustable from 5 to 45 W.
• Charging: USB-C, 5 V/2 A.
• Display: digital, 0.8 inch.
• Airflow: adjustable.
• Button lock: yes.
• Dimensions: 107.6 × 31.4 × 22.8 mm.
• Weight: 100 g.

Pods and compatibility

The two included LUXE X Dual Mesh pods each hold 5 ml and have a filling port beneath the silicone plug. The 0.6 ohm pod is pre-installed, and an additional 0.4 ohm pod is supplied. Both have integrated coils.

The device is compatible with LUXE X pods and LUXE XR empty pods. LUXE XR empty pods use separate GTX coils; these coils are not used in the included pods with integrated coils. LUXE XR empty pods and GTX coils are not included in the kit.

Replacement pods with built-in coils are available as Vaporesso LUXE X / XR Pod (2-pack), with a capacity of 5 ml per pod.

First fill, activation and lock

Remove the sticker from the pre-installed pod before first use. Take out the pod, open the silicone plug and fill e-liquid through the opening. Close the plug firmly. After the first fill, wait five minutes for the coil to become saturated.

Press the power button five times within two seconds to turn the device on or off. The device is activated using the power button or by inhalation. The toggle on the bottom locks or unlocks the display and power button.

The device has protection against short circuits, low or high resistance, high temperature and low battery voltage, plus an eight-second activation cut-off.

Wattage and airflow settings

Open the wattage setting by pressing the power button three times. Use the same button to change the wattage, then wait three seconds to confirm. The display shows wattage and battery level. Adjust airflow with the toggle on the side of the device.

Charging, care and pod replacement

Use the included USB-C cable to charge the battery from a compatible 5 V/2 A USB power source. Keep the device under supervision while charging. Keep the contacts between the pod and device clean, and switch the device off when not in use.

The included pods have integrated coils. Replace the entire pod when its coil is worn out. If only the e-liquid has run out, refill the pod.

Contents of the 5 ml kit

• 1 LUXE X3 battery device.
• 1 LUXE X Dual Mesh pod, 5 ml, 0.6 ohm, pre-installed.
• 1 LUXE X Dual Mesh pod, 5 ml, 0.4 ohm.
• 1 USB-C cable.
• Instruction manual and warranty card.
• Reminder card.

E-liquid is sold separately.

Colours

The eight colour variants are Carbon Black, Fluid Blue, Fluid Green, Fluid Purple, Gold Silk, Grey Silk, Sheer Pink and Sheer Red.